metaruss

Still my daily driver.  Been collecting some odds and ends that should hopefully help the spool department:  A Turbos Unleashed cast log header and Turbonetics T03/T04E hybrid single ball bearing turbo with a “Super 50″ compressor and a Stage II exhaust turbine in a .63 A/R housing attached to a Turbos Unleashed 3” swing valve (whew).  The header, housing, and swing valve are all ceramic thermal coated to keep temps down and gas velocities high.  The turbo flange on the header is larger than it should be, so I will likely need to port the housing flange somewhat.

The Super 70 and ported exhaust manifold that is in there now will end up in the CSX once I get a new cylinder head for it.  Trouble is the CSX needs to be running before I put this setup in there….